Technics SX-PR54/M - Manual (Page 29)

29
QQTG0701
Ab
ou
t th
e
dis
p
la
y
DISPLAY HOLD
Press this button to turn it on when you wish to
maintain the current display. You can keep a dis-
play which is normally automatically canceled,
for example, or even during a performance, you
can monitor information which is not shown on
the normal display.
• The indicator for this button may flash if the current dis-
play is one which is normally automatically canceled.
• If the PROGRAM MENUS button, for example, is
pressed, the DISPLAY HOLD mode is canceled.
CONTRAST
Press the CONTRAST button and adjust the dis-
play's viewability using the
∧
and
∨
buttons on
the screen.
• When adjusting the CONTRAST, the set value is shown
shortly on the display.
HELP
You can find an explanation of each button’s
function on the display.
1. Press the HELP button.
• The following display appears.
2. Use the buttons below the display to select a
language.
3. Press the OK button.
4. Press a button on the panel whose explana-
tion you wish to read.
• An explanation of the button’s function is shown on the
display.
5. Press the HELP button again to exit the help
mode.
• Attention display messages and error messages are also
shown in the selected language.
• The appearance of the display on your instrument may
be different from the illustrated display in this manual
depending on the region in which your instrument was
purchased and the selected display language.
DISPLAY HOLD EXIT
CONTRAST
HELP OTHER PARTS/TR
05_About the display.fm 29 ページ ２００３年５月１９日 月曜日 午後１時３９分