Technics SX-PR54/M - Manual (Page 104)

Part VI Sound
104
QQTG0701
Sou
n
d
Mixer
Use the MIXER display to visually adjust the major settings of each part. Use this display to make broad,
general changes to the settings.
1. On the SOUND MENU display, select MIXER.
• The MIXER display consists of 5 pages. Use the PAGE
buttons to switch among the pages.
• Each time the OTHER PARTS/TR button is pressed, the
part that is displayed changes.
• Even at the same numerical value, the PAN and effects
may differ depending on the sound.
• For some parts, such as the automatic accompaniment
parts, the items that can be adjusted are limited.
2. Adjust each parameter.
<PAGE 1>
SOUND:
Select SOUND. Use the buttons below the
display to set the sound for the corresponding
part.
• The buttons in the SOUND GROUP can also be used to
select the sound.
PAN:
Select PAN. Use the buttons below the display
to adjust the stereo balance of the corre-
sponding part (L64–CTR–R63).
VOLUME:
Select VOLUME. Use the buttons below the
display to adjust the volume of the corre-
sponding part (0 to 127).
• To mute a part, press both the corresponding balance
buttons as the same time. To cancel the mute, press
either balance button for the part.
<PAGE 2>
REVERB:
Select REVERB. Use the buttons below the
display to set the level of the REVERB for the
corresponding part (0 to 127).
MULTI:
Select MULTI. Use the buttons below the dis-
play to set the MULTI EFFECT to ON or OFF
for each part.
MULTI DEPTH:
Select MULTI DEPTH. Use the buttons below
the display to adjust the depth of the MULTI
EFFECT for the corresponding part (0 to 127).
<PAGE 3>
DIGITAL EFFECT:
Select DIGITAL EFF. Use the buttons below
the display to set the DIGITAL EFFECT to ON
or OFF for the corresponding part.
CHORUS:
Select CHORUS. Use the buttons below the
display to set the CHORUS to ON or OFF for
each part.
CHORUS DEPTH:
Select CHORUS DEPTH. Use the buttons
below the display to set the depth of the CHO-
RUS for the corresponding part (0 to 127).
<PAGE 4>
EQUALIZER HIGH:
Sound quality correction in the high range.
Select EQUALIZER HI FC; use the buttons
below the display to set the standard fre-
quency. Select EQUALIZER HI GAIN; use the
buttons below the display to set the ratio of
change.
11_Part VI.fm 104 ページ ２００３年５月１９日 月曜日 午後１時４４分