Technics SX-PR54/M - Manual (Page 79)

Part III Sequencer
79
QQTG0701
Se
qu
en
cer
5. Use the CHANGE TO
∧
and
∨
buttons to
specify the pitch you wish to change to.
6. Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
VELOCITY CHANGE
Modify the recorded velocity in specific mea-
sures of specific tracks.
1. Use the TRACK
∧
and
∨
buttons to select the
track you wish to edit.
• You cannot select the track for the CONTROL, RHYTHM
or CHORD part.
• If ALL is selected, all tracks will be edited.
2. Use the FIRST MEAS
∧
and
∨
buttons to
specify the start point (measure number) of
the velocity change.
3. Use the LAST MEAS
∧
and
∨
buttons to spec-
ify the end point (measure number) of the
velocity change.
4. Use the VELOCITY
∧
and
∨
buttons to specify
the change in velocity.
• The value you select will be added to or decrease from
the current velocity.
5. Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
TRANSPOSE
Change of key of specific measures of specific
tracks.
1. Use the TRACK
∧
and
∨
buttons to select the
track you wish to edit.
• You cannot select the track for the CONTROL, RHYTHM
or CHORD part.
• If ALL is selected, all tracks will be edited.
2. Use the FIRST MEAS
∧
and
∨
buttons to
specify the start point (measure number) of
the transpose.
3. Use the LAST MEAS
∧
and
∨
buttons to spec-
ify the end point (measure number) of the
transpose.
4. Use the TRANSPOSE
∧
and
∨
buttons to
specify the change in pitch.
• Increments are in semitones. A value of 12 is one octave.
A – value lowers the pitch, and a + value raises it.
5. Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
ADVANCE/DELAY
Speed up or delay the sound production of spec-
ified performance data.
1. Use the TRACK
∧
and
∨
buttons to select the
track you wish to edit.
• You cannot select the track for the CONTROL, RHYTHM
or CHORD part.
• If ALL is selected, all tracks will be edited.
2. Use the FIRST MEAS
∧
and
∨
buttons to
specify the start point (measure number) of
the change.
3. Use the LAST MEAS
∧
and
∨
buttons to spec-
ify the end point (measure number) of the
change.
4. Use the ADVANCE/DELAY
∧
and
∨
buttons
to accelerate or delay the timing of the sound
production (–96 to +96).
• A + value causes the notes to sound later, and a – value
causes the notes to sound earlier.
5. Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
08_Part III.fm 79 ページ ２００３年５月１６日 金曜日 午後５時４１分