Toshiba Strata DK 16 - Manual (Page 104)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-80
PROGRAM 42-0
CO LINE TO PBX/CENTREX CONNECTION
Specify CO lines by setting
Button/LEDs as defined by
the table below. SELECT = 0
4 2 0 P S H H Z Z S
(CO
Line)
(08)
(07)
(06)
(05)
(04)
(03)
(02)
(01)
LED
08
07
06
05
04
03
02
01
Set Button/LEDs
CENTREX/PBX
Connection (LED on)
Normal
(LED off)
NOTE: Shaded areas apply to DK16 only
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data reads all LEDs OFF for all CO lines.
3. This progam must be utilized to allow CENTREX/PBX (after flash) features to operate.
4. If CO line is programmed for behind CENTREX/PBX (LED ON), re-seize guard time is 1.5 seconds. If CO line
is programmed for normal operation guard time is 0.45 seconds. See Program 10-1, LED 02.