Toshiba Strata DK 16 User Manual
Page 68
![background image](/manuals/210223/68/background.png)
PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-44
IMPORTANT
Initialize Programs 00 ~ 97 every time :
•••••
A new system is installed
•••••
To bring a system's programming back to the default setting
Specify the range as follows:
To initialize one program at a time, just enter the individual
program number, then
#
.
PROGRAM 90
INITIALIZING PROGRAMS 00 ~ 97
WARNING!
Running this program will erase customer data.
NOTES:
1. Always complete Program 90 at new system installs, before
programming anything else. Skipping this step may cause erratic
system behavior.
2. Follow instructions in Table 1-C (Section 100-816-301) to clear this
data.
3. When Program 90 is run, it will initialize any program or range of
Programs without cycling system power.
H
Z
Z
9
P
S
H
S
0
Enter programming mode
END
Program 90
LEDs 01 and 02
must be lit
Program(s) to
be initialized
EXIT
programming
mode
01
#
LEDs 01 and 02
must flash
02
0
0
9
7