Toshiba Strata DK 16 - Manual (Page 105)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-81
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data assigns no access codes to PBX groups.
3.
• If access code is single digit, enter the first digit and press Button/LED 01 as
second digit.
• Press Button/LED 01 to delete a digit.
• Press Button/LED 02 for don't care. For example, pressing
8 + Button/LED
02 allows 80 ~ 89.
4. This program must be utilized to allow correct Toll Restriction and CENTREX/
PBX transfer operation.
PROGRAM 42-1 ~ 8
PBX/CENTREX ACCESS CODES
4 2 P S H H Z Z
Enter the PBX Group
number 1 ~ 8 that needs
an access code assigned.
ACCESS CODE = SELECT = 1~8
PBX Access Code Group
S
1
2
3
4
5
6
7
8
1st digit 2nd digit
PBX/CENTREX
Access Code
Number
Enter a 2-digit access
code for the group,
as defined by the table
below. See Note 3.
PBX/CENTREX
Outgoing Trunk
Access Code(s)