Toshiba Strata DK 16 - Manual (Page 115)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-91
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data does not assign door phone ringing to any station port.
All LEDs are OFF.
3. A range of ports may be entered by keying in the following:
4. Door phones can ring any number of digital and electronic telephones, but do not ring standard telephones or
other devices connected to KSTU, PESU, or PSTU station ports.
5. Only the lowest port in a ringing group will receive muted ring tone if all EKTs/DKTs in the ringing group are
busy and the door phone button is pressed.
PROGRAM 79
DOOR PHONE RINGING
7 9 P S H H Z Z
Button/LEDs
Feature LED
20
19
18
17
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
Logical Port Numbers
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19
SELECT = Logical Port Number
S
Enter the port number having
Door Phone Ringing assigned.
Muted ring to busy DKT/EKT
Door phone 2C Ring
Door phone 2B Ring
Door phone 2A Ring
Door phone 1C Ring
Door phone 1B Ring
Door phone 1A Ring
Select button/LEDs indicated
in the table below.
5
NOTE: Shaded areas apply to DK16 only
Low port in range High port in range