Toshiba Strata DK 16 User Manual
Page 88
PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-64
PROGRAM 29-1, 29-2
7
DK16 DSS CONSOLE (DDSS AND HDSS) BUTTON ASSIGNMENTS
CONSOLE
NOTES:
1.
For more information, see the instructions preceding the record sheets.
2.
Initialized data assigns the Base Unit, PEKU, or PDKU console to operate with
the telephone connected to the Base Unit’s first digital port or the PEKU or
PDKU's first port, respectively. See Program 28 to reassign a console to another
telephone, if desired.
3.
When assigning CO line access buttons (01 ~ 08) to the DSS console, the
associated telephone must be assigned access to the CO line. See Program 40.
4.
Initialized data assigns the
AC
(Code 89) to Group No. 3 Button19 and the
NT
button (Code 91) to Group No. 3 Button 20 on all consoles. All other buttons are
initialized as DSS and SD (for Station Speed Dial) buttons. Initialized button
assignments are shown after this record sheet.
5.
The
NT
and
AC
buttons may be changed to
DSS
,
CO
or
SD
buttons, but they
may not be reassigned to other locations.
6.
Important: Only program
SD
,
CO
,
DSS
,
AC
, and
NT
buttons; programming
other feature buttons on a console may cause system operation problems.
7.
DSS consoles are not available on DK8.
Code:
Assign the appropriate
SpeedDial, CO line
access, or DSS station
access code to the button
chosen. See code table
below for the buttons to
enter. See Notes 4 and 5.
2
9
P
S
H
H
Z
Z
S
10
09
08
07
06
05
04
03
02
01
Button/Code
20
19
18
17
16
15
14
13
12
11
Button/Code
10
09
08
07
06
05
04
03
02
01
Button/Code
20
19
18
17
16
15
14
13
12
11
Button/Code
10
09
08
07
06
05
04
03
02
01
Button/Code
20
19
18
17
16
15
14
13
12
11
Button/Code
Group No. 1
Group No. 2
Group No. 3
Console Number
Station Speed Dial
System Speed Dial
CO Line Access
DSS (Station Access)
AC
NT1
NT2
Button Type
10 ~ 49
60 ~ 99
01 ~ 08
#
00 ~
#
19
89
91
92
Code
Code Table
1
*
*
*
*
No. 01 ~ No. 20
Press the button/LED
that is in the same
position as the console
button being assigned.
The LED lights and the
LCD displays the console
button's number.
DSS Button Group 1~3:
Each console has three groups
of 20 LED buttons. Choose the
group to be assigned.
SELECT = 1 or 2 for consoles 1 or 2, respectively
DSS Number 1~2:
Each system can have up to two consoles. Enter the
console to which buttons are being assigned (DSS
console 1).
Copy this sheet as required and enter the console number and corresponding Select number.