Toshiba Strata DK 16 - Manual (Page 71)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-47
NOTES:
1. See instructions in Table 1-F (Section 100-816-301) to program the system with this
information.
2. Initialized passwords are 0000.
3. The LCD responds as follows, when a selection is made:
0 Version =
1 Password =
2 Password =
8 Sum =
9 Counter =
4. This selection is not programmable. It identifies the system's software version as follows:
5. These selections are not programmable. They are for factory test purposes only. The
Checksum and Counter vary as customer data is entered.
PROGRAM 00
SOFTWARE CHECK/REMOTE MAINTENANCE SECURITY CODE ASSIGNMENTS
H Z Z 0 P S H S 0
Enter 0 to check Software version.
Enter 1 to change 1st level password.
Enter 2 to change 2nd level password.
Enter 8 to check software sum.
Enter 9 to check power down or
power loss counter since Program 00
was last initialized.
See Note 3. Enter the 4-digit password.
Select
Code
0
1
2
8
9
ROM Version
1st Level Password
2nd Level Password
Software RAM Checksum
Power Cycle Counter
Item
=
=
=
=
=
Password or S/W Check Codes
Password Codes SELECT = Select Code
VERSION = See Note 4.
See Note 5.
See Note 5.
•
ROM Version
VERSION = PSSA •
ROM Type for DK16
ROM Version
VERSION = QMA •
ROM Type for DK8