Toshiba Strata DK 16 - Manual (Page 54)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-30
user. Digits may also be deleted from the front of
the dialed number.
6.13 LCR Station Access Priority Assign-
ments. Each station port defined in the system
may be assigned to one of four station priority
groups. The groups can have varying access to
the defined call routes at different times of day.
Each group is partitioned from the other groups.
6.20 Conditions
6.21 A number of conditions apply to LCR as-
signments. A summary of each is listed here.
Paragraph 7,
Completing the Least Cost Rout-
ing Record Sheets, gives more detailed expla-
nations and examples of how the conditions
relate to the programming process.
6.22 If a station has direct CO appearances or
pooled CO line buttons programmed to allow
direct outgoing line access, LCR will be by-
passed using the pooled line or a CO line button.
6.23 LCR accommodates special code dialing,
such as 911 for emergency response, 1-411 or
411 for information, or 800 area code toll-free
numbers. These calls can be directed to the
local call route. Examples are given in Para-
graph 4 (see Program 50-31 ~ 35).
IMPORTANT NOTE!
Always provide emergency service ac-
cess for numbers such as 911.
6.24 Basic System Record programs related to
LCR include:
•
Program 16 defines which outgoing CO lines
are assigned to CO line groups 81 ~ 88.
•
Program 40 denies a station complete CO
line access. This also applies to LCR.
•
Program 41 restricts outgoing CO line calls to
selected stations. These stations may make
outgoing calls through LCR.
6.25 Standard telephones that are Toll Restricted
should be required to use LCR to place outgoing
calls. This prevents Toll Restriction defeat when
the QRCU (in DK8) or K4RCU (in DK16) times out.
7 COMPLETING THE LEAST COST (LCR)
ROUTING SYSTEM RECORD
NOTE:
All stations using LCR should be ALLOWED
CO line access in Program 40, and DE-
NIED CO line access in Program 41.
7.01 The following instructions explain comple-
tion of the System Record Sheets used to pro-
gram LCR. Instructions are arranged in the same
order as data tables in the
Least Cost Routing
System Record. The instructions are intended to
give a concise, general definition of LCR charac-
teristics defined by each record sheet.
NOTES:
1. On each record sheet, enter required
data in the space provided to make a
selection, unless otherwise specified.
2. The initialized state and considerations
are documented on the record sheet.
7.10 LCR CO Line Programming Reference
Chart
7.11 This chart is intended for reference only.
Information relevant to LCR is compiled here
from
Basic System Programming.
1) Under the column labeled “CO Lines in
Group (01 ~ 08),” enter the numbers of the
CO lines assigned to groups 81 ~ 84 (for
STRATA DK8) or 81 ~ 88 (for STRATA
DK16). Refer to the completed record sheet
in Program 16 for this information.
2) Under the column labeled “CO Line Type/
Comments,” enter the service type, the
common carrier name, or the line type for
each line group, e.g., local line, Foreign
Exchange (FX) to 818 (LA), WATS (out of
state), etc.
3) Refer to Basic System Record, Program
40, to restrict stations from incoming and
outgoing access of CO lines, including us-
ing LCR. All stations that must use LCR to
make outgoing calls must NOT be restricted
in this program. These restrictions
do apply
to LCR.