Toshiba Strata DK 16 - Manual (Page 78)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-54
PROGRAM 10-3
SYSTEM ASSIGNMENTS, PART 3 OF 3
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data: all LEDs off.
3. See Section 100-816-208 for connecting two-way amplifiers for use on tandem, DISA, and conference telephone calls.
4. See Program 10-2 (LEDs 18 and 19), Program 10-1 (LEDs 19 and 20), and Program 15-5 for more information regarding
two CO line conference/tandem.
5. The amplifier, which is switched to two CO line calls automatically, is accessed on a first-come-first-serve basis. Two CO
line calls established while the amplifier is already being accessed will not be amplified.
6. QSMU option is for DK8 only.
H Z Z 1 P S H S 0
SELECT = 3 Button LEDs
3
Light LEDs as defined by the table below.
ALL LEDs with an "X" should be lit when you finish.
20
19
18
17
16
15
14
13
12
11
10
09
08
07
06
05
04 6
03
02 3, 4, 5
01
Button/LED X LED ON LED OFF
QSMU Option: TTY
PEKU/PESU Ports 17, 18 —
Amp. Circuits 6 and 7
QSMU Option: SMDR
Ports 17,18 — Stations Connected
LCD BLF Displays Port Numbers
(00 ~ 19, DK16) or (00 ~ 09, DK8)
Speed Dial Entry Timeout: 3 minutes
LCD BLF Displays Station Numbers
(10 ~ 29, DK16, 10 ~ 19, DK8)
Speed Dial Entry Timeout: 1 minute
NOTE: Shaded areas apply to DK16 only