Toshiba Strata DK 16 - Manual (Page 94)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-70
PROGRAM 34
HOLD/PARK RECALL TIMING
3 4 A S H H Z Z S
HOLD TIME = Seconds
Enter the number of seconds the
system will wait. Use three digits.
Acceptable range is 000 or
011~160. See Note 3. SELECT = Logical Port Number (00~19)
Enter the port number having
its Hold/Park Recall Time defined.
See Note 4 for entering a
range of ports.
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Logical
Port
16 17 18 19
Seconds
NOTE: Shaded areas apply to DK16 only
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data assigns a Hold /Park recall time of 032 seconds to all ports.
3. Enter 000 for no Hold/Park recall. Enter 011 ~ 160 for 11 to 160 seconds.
4. Enter a range of ports by keying in the following sequence:
Low port High port