Toshiba Strata DK 16 - Manual (Page 122)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-98
SETTING THE DATE, TIME AND DAY
NOTES:
1.
The date, time and day can be set immediately following initialization or after programming is completed.
2. The system should not be in programming mode for the date, time and day to be set.
HOW TO SET THE DAY
The day can be set from an LCD electronic or digital telephone connected to a logical port 00.
Press the following button sequence with the handset on-hook:
6 5 3
Enter the digit for today's day:
1
2
3
4
5
6
7
Intercom Redial
Electronic telephones can use
the
# button if they do not have
the Redial ( RDL ) button.
= Sunday
= Monday
= Tuesday
= Wednesday
= Thursday
= Friday
= Saturday
HOW TO SET THE TIME
The time can be set from an LCD electronic or digital telephone connected to a logical port 00.
Press the following button sequence with the handset on-hook:
6 5 2
Time in hours/minutes/seconds
format (HHMMSS from 000000
to 235959). If any of these values
is a single digit, precede with a
zero (0).
Intercom Redial
Electronic telephones can use
the
# button if they do not have
the Redial ( RDL ) button.
HOW TO SET THE DATE
The date can be set from an LCD electronic or digital telephone connected to a logical port 00.
Press the following button sequence with the handset on-hook:
6 5 1
Date in year/month/day
format (YYMMDD). If month
or day is a single digit, precede
with a zero (0).
Redial Intercom
Electronic telephones can use
the
# button if they do not have
the Redial ( RDL ) button.