Toshiba Strata DK 16 - Manual (Page 92)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-68
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data assigns Ringing Code 1 and Automatic Off-hook Code 00 for all ports.
3. To enter a range of ports dial the following button sequence:
4. Automatic Preference applies to going off-hook (lifting the handset) and pressing the Spkr button.
5. This program applies to digital and electronic telephones only; standard telephones always select the system intercom path
when going off-hook (lifting the handset).
PROGRAM 32
AUTOMATIC PREFERENCE
3 2 A S H H Z Z
Enter 0 to disable Ringing Line Preference.
Enter 1 to enable Ringing Line Preference.
DATA = Ringing Code
SELECT = Logical Port Number
S
Enter the Logical Port number of the
station having preference defined.
See Note 3 below for entering
a range of ports. Enter 00 for no selection.
Enter 01 for intercom.
Enter 02 for lowest CO line.
Enter 11 ~ 18 for Line Groups 1~ 8.
Automatic Preference Code:
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
Logical
Port
Number
Ringing
Code
(0 or 1)
Automatic
Preference
Code
NOTE: Shaded areas apply to DK16 only
Low port High port