Toshiba Strata DK 16 - Manual (Page 87)

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
2-63
PROGRAM 28
DK16 DSS CONSOLE/ATTENDANT TELEPHONE ASSIGNMENTS
2 8 P S H H Z Z
Enter the attendant digital or electronic
telephone number. See Note 5.
DSS ATT = (1~2) SELECT = (1~2)
S
1
2
DSS Console
(DDSS/HDSS)
Number
Attendant Digital / Electronic
Telephone Number (1 or 2)
Enter the DSS
console number.
See Note 4.
Base Unit/Expansion Unit PCB Slot
(Lowest Slot to Highest)
Base Unit (Digital Circuits):
Expansion Unit PCB (PEKU or PDKU):
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. A digital DDSS console can be assigned to an electronic telephone, and an HDSS console can be assigned to a digital telephone.
3. Refer to Program 03, Flexible PCB Slot Assignments, for the PEKU, PDKU, Base Unit slots configured to support consoles.
4. If more than one console is associated with one attendant telephone, then specify the same number attendant telephone for both
consoles associated with it.
5. Initialized data assigns console #1 to attendant telephone #1 and console #2 to attendant telephone #2.
6. DSS consoles are not available on DK8.