42 transmit pause timer register (txpause), Txpause), Section 5.42 – Texas Instruments TMS320C645x DSP User Manual
Page 128

www.ti.com
5.42 Transmit Pause Timer Register (TXPAUSE)
EMAC Port Registers
The Transmit Pause Timer Register (TXPAUSE) is shown in
and described in
.
Figure 70. Transmit Pause Timer Register (TXPAUSE)
31
16
Reserved
R-0
15
0
PAUSETIMER
R-0
LEGEND: R = Read only; -n = value after reset
Table 70. Transmit Pause Timer Register (TXPAUSE) Field Descriptions
Bit
Field
Value
Description
31-16
Reserved
0
Reserved
15-0
PAUSETIMER
Transmit pause timer value. These bits allow the contents of the transmit pause timer to be
observed. The transmit pause timer is loaded by a received (incoming) pause frame, and then
decremented at slot time intervals down to 0 at which time EMAC transmit frames are again
enabled.
Ethernet Media Access Controller (EMAC)/Management Data Input/Output (MDIO)
128
SPRU975B – August 2006