Toshiba RAS-09LKV-UL - Manual (Page 95)

– 95 –
No. Part name
Electric parts
box assembly
Procedures
1) Follow the procedure up to 3) in ‚ above.
2) Remove screw of earth lead attached to the
end plate of the evaporator.
3) Remove the lead wire cover, and remove
connector for the fan motor and connec-
tor for the louver motor from the electric
parts box assembly.
4) Pull out TC sensor from sensor holder of the
evaporator.
Remarks
<How to assemble the electric parts box>
1) Hook the top part of the electric parts box
assembly onto the claws on the back body,
and secure it using the fixing screw.
Now attach the display unit. Connect the
connectors for the fan motor and louver motor.
2) Secure the grounding wire using the fixing
screw. Insert the TC sensor into the sensor
holder.
* Be absolutely sure to loop the grounding
wire and TC sensor leads once at the
bottom.
5) Disengage the display unit by simply pushing
at the top of the display unit.
6) Remove the fixing screw that secures the
electric parts box assembly, and remove the
Electric part
box cover
assembly.
connector
AC fan motor
connector
Louver motor
Fixing screw
Earth Screw
TC sensor
k
connector
Fan motor
FILE NO. SVM-10019