Vidikron VP-60 User Manual
Page 14
13
»
Rear View / Terminal Board
A
AC IN
Connect the included power cord here.
B
Connect speakers (not available from Vidikron) here.
Maintain the correct polarity.
C
VIDEO 1,2,3 (BNC, RCA, S-Video)
Connect VCR’s, DVD’s or Video Cameras, etc here.
VIDEO1 can be used for INPUT or OUTPUT.
D
AUDIO1, AUDIO2, AUDIO3
These are audio input terminals. The input is selectable.
Set which video image to distribute them from the audio
menu screen.
E
DVD1 / HD1
Connect DVD’s, High Definition or Laser Disks, etc here.
F
RGB2 / DVD2 / HD2
RGB2: Connect an analog RGB signal and the
synchronization signal.
DVD2 / HD2: Connect DVD’s, High Definition sources,
Laser Discs, etc. here. This input can be set for use with an
RGB or Component source.
G
RGB1 (mini D-Sub 15pin)
Connect an analog RGB signal from a computer, etc. here.
This input can be used for Input or Output.
H
RGB3 (DVI 24pin)
Connect a digital signal (TMDS) from a source with a DVI
output.
I
EXTERNAL CONTROL
This terminal is used when operating and controlling the
monitor externally by RS-232.
Part Names and Functions