Vidikron VP-60 - Manual (Page 71)

5. Press the EXIT button to return to the VIDEO WALL screen.
DISP. MODE
Select the screen mode from between two options
(Splitting, Blanking).
Example: Setting “BLANK”
Perform Steps 1-2 of VIDEO WALL, then...
3. Use the and buttons to select “DISP. MODE”.
4. Use the and buttons to select “BLANK”.
The mode switches as follows each time the or button is
pressed:
SPLIT BLANK
AUTO ID
This feature automatically sets the ID numbers of multiple
displays connected to each other.
Example: Setting “ON”
70
OSD (On Screen Display) Controls
POSITION NO. 4
VIDEO WALL POSITION
SEL. ADJ. EXIT EXIT
Information
■ VIDEO WALL POSITION settings
1 Screen ..... There is no need to set POSITION.
4 Screens
9 Screens
NO. 1 NO. 2
NO. 4 NO. 3
NO. 7 NO. 8 NO. 9
NO. 10 NO. 11 NO. 12
NO. 13 NO. 14 NO. 15
DIVIDER : 1
POSITON
DISP. MODE : BLANK
AUTO ID : OFF
IMAGE ADJUST
P. ON DELAY
: OFF
LUM SET LINK : OFF
REPTR TIME
: OFF
VIDEO WALL
SEL. ADJ. EXIT EXIT
Information
■ DISP. MODE SETTINGS
SPLIT .......... Combines enlarged screens and creates multiple
screens.
BLANK ....... Corrects misalignment of combined screen
portions and creates multiple screens.