Vidikron VP-60 - Manual (Page 63)

62
PROGRAM TIMER
This sets the day and time at which the power will be switched
ON/OFF as well as the input mode.
Example: Setting so that the power will be switched on at 8:30
A.M., Monday, displaying RGB2 source, and switched off at
10:30 A.M.
Perform Steps 1-2 of TIMER, then...
3. Use the and buttons to select “PROGRAM”.
4. Use the and buttons to select “ON”, then press the MENU
button. The “PROGRAM TIMER” screen appears.
5. Adjust using the and buttons and ZOOM +/- button.
The mode switches as follows each time the ZOOM +/- button is
pressed:
• DATE
-- SUN MON .... SAT * SUN *MON .... *SAT
• ON/OFF Hour
00 01 02 .... 21 22 23
• MINUTE
00 01 02 .... 57 58 59
• INPUT
-- LAST VIDEO1 VIDEO2 VIDEO3 HD/DVD1
RGB3 RGB2 RGB1 HD/DVD2
• FUNCTION
-- ORBITER INVERSE WHITE IMAGE SWEEP
6. Once the setting is completed...
Press the EXIT button. The programs are stored, and return to the
TIMER screen.
OSD (On Screen Display) Controls
PRESENT TIME
PROGRAM : OFF
TIMER
SEL. ADJ. EXIT EXIT
ZOOM
PROGRAM TIMER
SEL. ADJ. EXIT EXIT
DATE ON OFF INPUT FUNCTION
--- - -:- - - -:- - --- -----
--- - -:- - - -:- - --- -----
--- - -:- - - -:- - --- -----
--- - -:- - - -:- - --- -----
--- - -:- - - -:- - --- -----
--- - -:- - - -:- - --- -----
MON 08:30 10:30 RGB2 INVERSE