Vidikron VP-60 - Manual (Page 24)

23
BASIC OPERATIONS
» POWER
To turn the unit ON and OFF:
1. Plug the power cord into an active AC power outlet.
2. Press the POWER ON button (on the remote control or control
panel) to turn on the unit.
The monitor’s POWER/STANDBY indicator will light up (green)
when the unit is on.
3. Press the POWER OFF button (on the remote control or control
panel) to turn off the unit.
The monitor’s POWER/STANDBY indicator turns red and the
standby mode is set (only when turning off the unit with the
remote control).
» VOLUME
To adjust the sound volume:
1. Press and hold the VOLUME (+) button (on the remote control
or the unit) to increase to the desired level.
2. Press and hold the VOLUME (-) button (on the remote control
or the unit) to decrease to the desired level.
» MUTE
To cancel the sound:
Press the MUTE button on the remote control to cancel the sound;
press again to restore.
» DISPLAY
To check the settings:
1. The screen changes each time the DISPLAY button is pressed.
2. If the button is not pressed for approximately three seconds, the
menu turns off.