Vidikron VP-60 - Manual (Page 55)

54
OSD (On Screen Display) Controls
Adjust the ORBITER function manually.
Set the amount of shift and the time between movement.
Example: Setting so that the picture moves 2 dots horizontally
and 3 lines vertically every 3 minutes.
Perform Steps 1-3 of ORBITER, then...
4. Use the and buttons to select “MANUAL”, then press
the MENU button. The “ORBITER” screen appears.
5. Adjust the items using the and buttons. The mode
switches as follows each time the or button is pressed:
• H-DOT
1 DOT 2 DOT ..... 19 DOT 20 DOT
• V-LINE
1 LINE 2 LINE ..... 19 LINE 20 LINE
• TIME
1 M 2 M 3 M 4 M 5 M
INVERSE
Use this to set the inverse mode or to display a white screen.
Example: Setting “INVERSE” to “WHITE”
Perform Steps 1-2 of PIXL PROTECT, then...
3. Use the and buttons to select “INVERSE”.
4. Use the and buttons to select “WHITE”. The mode
switches as follows each time the or button is pressed:
OFF ON WHITE
Information
■ ORBITER FUNCTION settings
H-DOT .......... Moves from 1 to 20 dots in the
horizontal direction.
V-LINE.......... Moves from 1 to 20 dots in the
vertical direction.
TIME ............. Interval of 1~5 minutes.
H-DOT : 2 DOT
V-LINE : 4 LINE
TIME : 3 M
ORBITER
SEL. ADJ. EXIT EXIT
LUM. SETTING : AUTO
ORBITER
: OFF
INVERSE : WHITE
IMAGE SWEEP : OFF
SOFTEN
: OFF
PIXL PROTECT
SEL. ADJ. EXIT EXIT