Vidikron VP-60 - Manual (Page 78)

77
OSD (On Screen Display) Controls
» Video Standard Menu
Setting the video signal format
Use these operations to set the video standards of composite video
signals or Y/C input signals.
Example: Setting the video standard to “3.58 NTSC”
Press the MENU button on the remote control to display the
MAIN MENU on the screen, then...
1. Use the and buttons to select “VIDEO STANDARD”,
then press the MENU button. The “VIDEO STANDARD” screen
appears.
2. To select “3.58NTSC”...
Use the and buttons to select “3.58NTSC”.
The mode switches as follows when the and buttons are
pressed:
→ AUTO ↔ 3.58NTSC ↔ 4.43NTSC ←
→ SECAM ↔ PAL-M ↔ PAL-N ↔ PAL-60 ↔ PAL ←
3. Once the setting is completed...
Press the EXIT button to return to the main menu. To delete the
main menu, press the EXIT button.
VIDEO STANDARD
ADJ. EXIT EXIT
VIDEO STANDARD
: 3.58NTSC