Vidikron VP-60 - Manual (Page 44)

4. Once all adjustments are completed...
Press the EXIT button to return to the main menu, To delete the
main menu, press the EXIT button once more.
Information
■ When “COMPUTER” is off
When Auto Picture is off, the Fine Picture and the Picture ADJ. items
area displayed so that you can adjust them.
■ Adjusting the COMPUTER
ON .............. The picture ADJ., Fine Picture and Position adjustments
are made automatically. Not available for digital ZOOM.
OFF ............ The Picture ADJ., Fine Picture and Position adjustments
are made manually.
* If FINE PICTURE will not adjust, set “Computer” to OFF and adjust
manually.
■ Adjusting the position of the image
V SHIFT....................Adjusts the vertical position of the image.
H SHIFT....................Adjusts the horizontal position of the image.
V-SIZE ......................Adjusts the vertical size of the image.
(Except for I-WIDE mode)
H-SIZE.......................Adjusts the horizontal size of the image.
(Except for I-WIDE mode)
FINE PICTURE* .... Adjusts for flickering.
PICTURE ADJ.* ..... Adjusts for striped patterns on the image.
*The Picture ADJ. and Fine Picture features are available only when
the “Computer” is off.
* The COMPUTER, FINE PICTURE and PICTURE ADJ. are
available only for RGB signals. But, these features are not available
for moving pictures on VIDEO, COMP or RGB.
■ Restoring the factory defaults settings
Select “FACTORY” under the SETTING 1 menu. Note that this also
restores other settings to the factory defaults for Auto Picture.
43
OSD (On Screen Display) Controls
ASPECT RATIO : I-WIDE
V SHIFT 0
H SHIFT 0
V - SIZE 0
H - SIZE 0
COMPUTER : OFF
FINE PICTURE 0
PICTURE ADJ. 0
IMAGE OPTIONS
SEL. ADJ. EXIT EXIT