Vidikron VP-60 - Manual (Page 51)

» SETTING 2 Menu
Setting the Auto Off for computer images
This energy-saving (Auto Off) function automatically reduces the
monitor’s power consumption if no operation is performed for a
certain amount of time.
Example: Turning the Auto Off function on
Perform the following operations.
Press the MENU button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the and buttons to select “SETTING 2”, then press the
MENU button. The “SETTING 2” menu appears.
2. Use the and buttons to select “AUTO OFF”.
3. To turn the Auto Off function on ...
Use the and buttons to select “ON”. The mode switches as
follows each time the or button is pressed:
ON OFF
4. Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once more.
50
OSD (On Screen Display) Controls
Information
■ AUTO OFF function
* The auto off function automatically reduces the monitor’s power
consumption if the computer’s keyboard or mouse is not operated for
a certain amount of time. This function can be used when using the
monitor with a computer.
* If the computer’s power is not turned on or if the computer and
selector tuner are not properly connected, the system is set to the off
state.
* For instructions on using the computer’s Auto Off function, refer to
the computer’s operating instructions.
■ AUTO OFF settings
ON ........ In this mode the Auto Off function is turned on. OFF ....... In
this mode the Auto Off function is turned off.
■ AUTO OFF function and POWER / STANDBY indicator
The POWER/STANDBY indicator indicates the status of the Auto Off
function. See page 51 for indicator status and description.
■ Restoring the factory default settings
Select “FACTORY” under the SETTING 1 menu.
Note that this also restores other settings to the factory defaults.
AUTO OFF : OFF f
CINEMA MODE : ON
PIXL PROTECT : OFF
GRAY LEVEL
: 3
S1 / S2 : OFF
DVI TYPE
SETTING 2 2 / 3
SEL. ADJ. EXIT EXIT
PREVIOUS PG.
NEXT PAGE