Xantrex Technology RS3000 - Manual (Page 52)

Configuration
3–2 975-0170-01-01
General Configuration Information
System Control Panel
The System Control Panel provides configuration and monitoring
capability for all Xanbus-enabled devices on the network. All changes to
the configuration of the RS3000 are made with the System Control Panel
(SCP). See “Using the System Control Panel” on page 2–3.
The front panel of the RS3000 provides limited control, including reset;
charger enable and disable; and inverter enable and disable.
Enabling a function When a function is enabled, it is allowed to occur but other conditions
may have to be met before the function is activated or turned on. For
example, the charger function on the RS3000 may be enabled, but it will
not charge unless qualified AC power is present.
Disabling a function When a function is disabled, it is not allowed to occur and if it is
occurring, it is terminated. Regardless of other conditions, the function
will not be activated. For example, even if AC power is present, if the
charger is disabled, the unit will not charge.
These functions can also be controlled from the System Control Panel.