Xantrex Technology RS3000 - Manual (Page 62)

Configuration
3–12 975-0170-01-01
RS3000 Menu (Basic)
The RS3000 basic menu indicates the status of items and lists settings that
you may have to adjust on a routine basis.
If advanced menu is enabled, scroll through the RS3000 advanced menu
items until Basic Menu is highlighted and press Enter. See “Returning to
RS3000 Basic Menu” on page 3–7.
This section describes each item in detail with an example of the line item
as it appears on the System Control Panel. Each item is described in terms
of its purpose, whether it is a display or configurable setting, when to use,
and the outcome of changing the setting.
Inverter
Configurable setting This setting lets you enable or disable the inverter. In the example shown,
the inverter is enabled. For an explanation of enable and disable, see
“Terminology” on page C–1. The default setting for the inverter is
disabled.
When to use Enable the inverter when you would like to have AC power from the
inverter.
Outcome The inverter is enabled. The inverter provides power from the batteries
unless qualified AC input power is present.
Charger
Configurable setting This setting lets you enable or disable the operation of the charger. In the
example shown, the charger is enabled. The default setting for the charger
is enabled.
When to use Set the charger to Enabled when you want your batteries charged when
connected to AC power.
The charger can be set to Disabled anytime during the charge cycle to
immediately stop charging. The charger can also be enabled or disabled
from the RS3000 front panel.
Important: On the System Control Panel, use the up arrow button or down
arrow button to change the value. Holding down a button lets you scroll through
values quickly.
Inverter [Enabled]
Charger [Enabled]