Xantrex Technology RS3000 - Manual (Page 69)

Configuration
975-0170-01-01 3–19
Equalize
This feature is the same as described on the basic menu on page 3–13.
Load Sense
Configurable setting This setting lets you enable (turn On) or disable (turn Off) the load
sensing function. The default setting for this value is Off, as shown in the
example.
When to use Enable this setting if you want the inverter to conserve battery power
when there are small loads or no loads applied.
Outcome A small load like a clock display on a microwave may not get power.
When loads are below the load sense threshold, the inverter will turn off
the output to save battery power.
Clear Faults
This feature is the same as described on the basic menu on page 3–17.
View Device Info
For more information on this sub menu, Device Information, see “View
Device Info (View Device Information)” on page 3–27.
Basic Menu
Purpose Selecting Basic Menu takes you back to the basic menu of the RS3000
only. Advanced menu items will no longer be visible on the System
Control Panel.
When to use Use this setting when you want to return to the basic menu of the RS3000.
Load sense [Off]