Xantrex Technology RS3000 - Manual (Page 96)

Troubleshooting
4–16 975-0170-01-01
F41 Reset the RS3000. If
problem persists, call
customer service. Manual Dead battery charger
timeout Try restarting dead battery
charging once. Then check the
condition of the battery and
replace if necessary.
F64 Improper AC in.
Reduce AC loads.
See manual. Manual Neutral Over Current 1 Clear fault. Reduce AC loads
and/or disable the charger. If
problem persists, use split
phase AC input.
F500 Silicon Serial ID
Failure Manual Silicon Serial ID
Failure Service required.
F502 Watchdog reset error Manual Watchdog reset error Service required.
F505 Controller fault Manual Controller fault Service required.
F506 Wrong fault
identifier Manual Wrong fault identifier Service required.
F507 Wrong identifier Manual Wrong identifier Service required.
F508 Invalid interrupt Manual Invalid interrupt Service required.
Table 4-4 Fault Messages
Fault
Number Message Fault
Type
Cause Solution