Xantrex Technology RS3000 - Manual (Page 54)

Configuration
3–4 975-0170-01-01
Viewing the System Screen
The System screen displays system activity. The information appearing
on the System screen varies with the status of the inverter/charger:
Standby, Inverting, Charging, AC Bypass, Load Sense or Equalize. See
“Modes” on page 3–10 for an explanation of the different modes. For
example, Figure 3-2 shows the RS3000 in the float stage of charging.
You cannot select or change any of the information on the System screen.
If you would like to view more detailed information, press the Enter
button (indicated by the menu arrow) to go to the Select Device menu.
Viewing the Select Device Menu
The Select Device menu is where you can view a list of all the Xanbus-
enabled devices in your power system.
To view the Select Device menu:
◆ On the System screen, press Enter.
The Select Device menu appears with RS3000 highlighted, as shown in
Figure 3-3.
Figure 3-2 RS3000 Float System Screen (Example)
menu