Acnodes FPC 7160 - Manual (Page 102)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7160
15.6” Industrial Panel PC
B. ONE KEY RECOVERY
B.1 ONE KEY RECOVERY INTRODUCTION
The one key recovery is an easy-to-use front end for the Norton Ghost system backup and recovery
tool. The one key recovery provides quick and easy shortcuts for creating a backup and reverting to
that backup or for reverting to the factory default settings.
The One Key Recovery tool menu is shown below.
Prior to using the One Key Recovery tool (as shown in Figure B-1) to backup or restore Windows
system, five setup procedures are required.
1. Hardware and BIOS setup (see Section B.2.1)
2. Create partitions (see Section B.2.2)
3. Install operating system, drivers and system applications (see Section B.2.3)
4. Build-up recovery partition (see Section B.2.4)
5. Create factory default image (see Section B.2.5)
After completing the five initial setup procedures as described above, users can access the recovery
tool by pressing <F3> while booting up the system. The detailed information of each function is de-
scribed in Section B.4.
NOTE:
The initial setup procedures for Linux system are described in Section B.3.