Acnodes FPC 7160 - Manual (Page 105)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7160
15.6” Industrial Panel PC
B.2 SETUP PROCEDURE FOR WINDOWS
Prior to using the recovery tool to backup or restore Windows system, a few setup procedures are
required.
Step 1: Hardware and BIOS setup (see Section B.2.1)
Step 2: Create partitions (see Section B.2.2)
Step 3: Install operating system, drivers and system applications (see Section B.2.3)
Step 4: Build-up recovery partition (see Section B.2.4)
Step 5: Create factory default image (see Section B.2.5)
The detailed descriptions are described in the following sections.
NOTE:
The setup procedures described below are for Microsoft Windows operating system users. For
Linux system, most setup procedures are the same with Microsoft Windows except for several steps
which is described in Section B.3.
B.2.1 HARDWARE AND BIOS SETUP
Step 1: Make sure the system is powered off and unplugged.
Step 2: Install a hard drive or SSD in the system. An unformatted and unpartitioned disk is recom-
mended.
Step 3: Connect an optical disk drive to the system and insert the recovery CD.
Step 4: Turn on the system.
Step 5: Press the <DELETE> key as soon as the system is turned on to enter the BIOS.
Step 6: Select the connected optical disk drive as the 1st boot device. (Boot Boot Device Priority
1st Boot Device).
Step 7: Save changes and restart the computer. Continue to the next section for instructions on parti-
tioning the internal storage.