Acnodes FPC 7160 - Manual (Page 51)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7160
15.6” Industrial Panel PC
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen cable with the
female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector Once the connectors are properly aligned with the insert the male
connector from the VGA screen into the female connector on the FPC7160/ FPC7162. See Figure 2-
35.
Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA monitor to the external
interface by tightening the two retention screws on either side of the connector.
2.10 Power Connection
The power cable connects the panel PC to the power supply. The power cable is required for operation
of the panel PC.
Step 1: Connect one end to the panel PC.
Step 2: Connect the other end to the included power supply
2.11 RFID Reader Specs and Setup (Optional)
Some of the FPC7160/ FPC7162 models include RFID reader. There are two types of RFID modules
and the specifications of the RFID modules are listed below.
2.11.1 RFID Module for EM Models
Table 2-15 lists the specifications of the RFID module installed in the FPC7160/ FPC7162 EM
models.