Fpc 7160, 1 access the jumpers, 2 cf card setup – Acnodes FPC 7160 User Manual
Page 28
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7160
15.6” Industrial Panel PC
2.7.1 ACCESS THE JUMPERS
To access the jumpers, please remove the back panel and the internal aluminum chassis. To remove the
back panel, please refer to Section 4.3.
2.7.2 CF CARD SETUP
Jumper Label:
JCF1 (FPC7160) J2 (FPC7162)
Jumper Type: 2-pin header
Jumper Settings:
See Table 2-6
Jumper Location:
See Figure 2-9
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave device or the
master device. CF Card Setup jumper settings are shown in Table 2-6.