Acnodes FPC 7160 - Manual (Page 118)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7160
15.6” Industrial Panel PC
B.4.2 Backup System
To backup the system, please follow the steps below.
Step 1: Type <2> and press <Enter> in the main menu.
Step 2: The Symantec Ghost window appears and starts to backup the system. A backup image
called iei_user.GHO is created in the hidden Recovery partition.
Step 3: The screen is shown as in Figure B-30 when system backup is completed. Press any key to
reboot the system.
B.4.3 Restore Your Last Backup
To restore the last system backup, please follow the steps below.
Step 1: Type <3> and press <Enter> in the main menu.
Step 2: The Symantec Ghost window appears and starts to restore the last backup image
(iei_user.GHO).
Step 3: The screen is shown as in Figure B-32 when backup recovery is completed. Press any key to
reboot the system.
B.4.4 Manual
To restore the last system backup, please follow the steps below.
Step 1: Type <4> and press <Enter> in the main menu.
Step 2: The Symantec Ghost window appears. Use the Ghost program to backup or recover the
system manually.
Step 3: When backup or recovery is completed, press any key to reboot the system.