Fpc 7160, B.2.2 create partitions – Acnodes FPC 7160 User Manual
Page 106
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7160
15.6” Industrial Panel PC
B.2.2 CREATE PARTITIONS
To create the system backup, the main storage device must be split into two partitions (three partitions
for Linux). The first partition will be for the operating system, while the second partition will be invisible
to the operating system and contain the backup made by the one key recovery software.
Step 1: Put the recovery CD in the optical drive of the system.
Step 2: Boot the system from recovery CD. When prompted, press any key to boot from the recovery
CD. It will take a while to launch the recovery tool. Please be patient!
Step 3: The recovery tool setup menu is shown as below.
Step 4: Press <5> then <Enter>.