Fpc 7160, 4 com1 port pin 9 select – Acnodes FPC 7160 User Manual
Page 31
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7160
15.6” Industrial Panel PC
2.7.4 COM1 PORT PIN 9 SELECT
Jumper Label:
JP5 (FPC 7160) JP7 (FPC7162)
Jumper Type: 10-pin header
Jumper Settings:
See Table 2-8
Jumper Location:
See Figure 2-11
The jumper configures pin 9 on COM1 connector. Pin 9 on the COM1 connector can be set as the ring
(RI) signal, +5 V or +12 V. The COM1 Pin 9 Setting jumper selection options are shown in Table 2-8.
The COM1 Pin 9 Setting jumper locations are shown in Figure 2-11 below.