Fpc 7160, 5 com3 port pin 9 select – Acnodes FPC 7160 User Manual
Page 33
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7160
15.6” Industrial Panel PC
2.7.5 COM3 PORT PIN 9 SELECT
Jumper Label:
JP7 (FPC 7160) JP8 (FPC7162)
Jumper Type: 6-pin header
Jumper Settings:
See Table 2-9
Jumper Location:
See Figure 2-12
The jumper configures pin 9 on COM3 DB-9 connectors. Pin 9 on the COM3 DB-9 connector can be set
as the ring (RI) signal, +5 V or +12 V. The COM3 Pin 9 Setting jumper selection options are shown in
Table 2-8.
The COM3 Pin 9 Setting jumper locations are shown in Figure 2-11 below.