Acnodes FPC 7160 - Manual (Page 107)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7160
15.6” Industrial Panel PC
Step 5: The command prompt window appears. Type the following commands (marked in red) to
create two partitions. One is for the OS installation; the other is for saving recovery files and images
which will be an invisible partition.
(Press <Enter> after entering each line below)
system32>diskpart DISKPART>list vol DISKPART>sel disk 0
DISKPART>create part pri size=
DISKPART>assign letter=N
DISKPART>create part pri size=
DISKPART>assign letter=F
DISKPART>exit
system32>format N: /fs:ntfs /q /y
system32>format F: /fs:ntfs /q /v:Recovery /y
system32>exit