Acnodes FPC 7160 - Manual (Page 80)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7160
15.6” Industrial Panel PC
Emulation Type [Auto]
Use the Emulation Type BIOS option to specify the type of emulation BIOS has to pro-
vide for the USB device.
Auto DEFAULT
BIOS auto-detects the current USB.
Floppy
The USB device will be emulated as a floppy drive. The device can be either A: or B:
responding to INT13h calls that return DL = 0 or DL = 1respectively.
Forced FDD
Allows a hard disk image to be connected as a floppy image. This option works
only for drives formatted with FAT12, FAT16 or FAT32.
Hard Disk
Allows the USB device to be emulated as hard disk responding to INT13h calls that
return DL values of 80h or above.
CDROM
Assumes the CD-ROM is formatted as bootable media. All the devices that sup-
port block sizes greater than 512 bytes can only be booted using this option.
5.4 PCI/PnP
Use the PCI/PnP menu (BIOS Menu 13) to configure advanced PCI and PnP settings.
WARNING:
Setting wrong values for the BIOS selections in the PCIPnP BIOS menu may cause the system to malfunc-
tion.