Acnodes FPC 7160 - Manual (Page 17)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7160
15.6” Industrial Panel PC
CHAPTER 2 INSTALLATION
WARNING:
When installing the FPC7160/ FPC7162, make sure to:
-Turn the power off: Chance of electrocution. Turn off the monitor and unplug it from
the power supply.
-Only let certified engineers change the hardware settings: Incorrect settings can
cause irreparable damage to the product.
-Install the monitor with assistance: The product is very heavy and may be damaged
by drops and bumps. Two or more people should install the panel PC.
-Take anti-static precautions: Electrostatic discharge can destroy electrical compo
nents and injure the user. Users must ground themselves using an anti-static wrist
band or similar device.
The installation steps below should be followed in order.
Step 1: Unpack the flat panel PC
Step 2: Check all the required parts are included
Step 3: Install the hard drive
Step 4: Install the CompactFlash® card
Step 5: Mount the flat panel PC
Step 6: Connect peripheral devices to the bottom panel of the flat panel PC
Step 7: Connect the power cable
Step 8: Configure the system