Fpc 7160 – Acnodes FPC 7160 User Manual
Page 22
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7160
15.6” Industrial Panel PC
Step 4: Replace the brackets, access panel and screws.
2.5 EXPANSION MODULE INSTALLATION
This section outlines the installation of the expansion modules in the FPC7160/
FPC7162. To install the modules, please follow the steps below:
Step 1: Unfasten the left plastic side access panel (Expansion module access panel)
retention screws and remove the left plastic side access panel (See figure below).
Step 2: Locate the two bracket retention screws. Unfasten screws and remove the
bracket (See figure below, indicated in yellow). If a serial port expansion module is
installed, then remove the serial port retention screws before removing the bracket.