Fpc 7160, 3 usb device connection, 4 vga monitor connection – Acnodes FPC 7160 User Manual
Page 50
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7160
15.6” Industrial Panel PC
Step 3: Secure the connector. Secure the serial device connector to the external interface by tightening
the two retention screws on either side of the connector.
2.9.3 USB DEVICE CONNECTION
To connect USB devices to the FPC7160/ FPC 7162, please follow the instructions below.
Step 1: Located the USB connectors. The locations of the USB connectors are shown in Chapter 2.
Step 2: Align the connectors. Align the USB device connector with one of the connectors on the bottom
panel. See Figure 2-34.
Step 3: Insert the device connector. Once aligned, gently insert the USB device connector into the
onboard connector.
2.9.4 VGA Monitor Connection
The VGA output can be connected to an external VGA monitor. To connect the VGA monitor to the
FPC7160/ FPC7162, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15 connector is shown in
Chapter 3.