Fpc 7160, B.2.5 create factory default image – Acnodes FPC 7160 User Manual
Page 110
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
FPC 7160
15.6” Industrial Panel PC
Step 6: After completing the system configuration, press any key in the following window to reboot the
system.
Step 7: Eject the recovery CD.
B.2.5 Create Factory Default Image
NOTE:
Before creating the factory default image, please configure the system to a factory default environ-
ment, including driver and application installations.
To create a factory default image, please follow the steps below.
Step 1: Turn on the system. When the following screen displays (Figure B-10), press the <F3> key to
access the recovery tool. The message will display for 10 seconds, please press F3 before the sys-
tem boots into the operating system