Garmin G1000 Mooney M20TN - Manual (Page 145)

5-27
GPS NAVIGATION
190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
OPERATIONS
The following Inset Map operations can be performed (operations are performed independently of the
MFD):
• Changing the zoom range
• Changing the declutter level
• Map panning
To change the Inset Map zoom range, turn the joystick clockwise to increase or counterclockwise to decrease
the range. Zoom ranges from 500 feet to 2,000 nautical miles. To change the declutter level, press the INSET
Softkey. Press the DCLTR Softkey to remove background map details until the desired amount of detail is
displayed. The declutter level appears in the Softkey (i.e., DCLTR-1).
Panning the map:
1) Push in the JOYSTICK to display the map pointer. The map can now move beyond its current limits without
adjusting the range.
2) Move the JOYSTICK to pan the map in the general direction of the desired location. When the pointer is
placed on an object, the name of the object is highlighted for approximately 4 seconds (even if the name was
not originally displayed on the map). This feature applies to everything displayed on the map except for route
lines.
3) Push in the JOYSTICK to cancel the panning function and return to the present position on the map.