Garmin G1000 Mooney M20TN - Manual (Page 366)

190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN D-2
APPENDIX D
W
HAT HAPPENS WHEN AN APPROACH IS SELECTED
? C
AN A FLIGHT PLAN WITH AN APPROACH
,
A DEPARTURE
,
OR AN
ARRIVAL BE STORED
?
When an approach, departure, or arrival is loaded into the active flight plan, a set of approach, departure,
or arrival waypoints is inserted into the flight plan, along with a header line showing the title of the selected
instrument procedure. The original enroute portion of the flight plan remains active, unless the instrument
procedure is activated. This may be done either when the procedure is loaded or at a later time.
Flight plans can also be stored with an approach, a departure, or an arrival. Note that the active flight plan
is erased when the system is turned off. Also, the active flight plan is overwritten when another flight plan is
activated. When storing flight plans with an approach, a departure, or an arrival, the G1000 uses the waypoint
information from the current database to define the waypoints. If the database is changed or updated, the
G1000 System automatically updates the information, provided the procedure has not been modified. Should
an approach, departure, or arrival procedure no longer be available, the flight plan becomes locked until the
procedure is deleted from the flight plan.
C
AN
“
SLANT
G
OLF
” (“/G”)
BE FILED USING THE
G1000?
“/G” may be filed for a flight plan. The G1000 System meets the requirements of TSO-C129 Class A1 or A2
installation. Non-precision GPS approaches are not to be flown with an expired database. See the approved
Aircraft Flight Manual Supplement (AFMS) as well as the Aeronautical Information Manual (AIM) for more
information.
W
HAT DOES THE
OBS S
OFTKEY DO
?
The OBS Softkey is used to select manual sequencing of waypoints. Activating OBS mode sets the current
active-to waypoint as the primary navigation reference and prevents the system from sequencing to the next
waypoint in a flight plan. When OBS mode is cancelled, automatic waypoint sequencing is continued, and
the G1000 automatically activates the next waypoint in the flight plan once the aircraft has crossed the present
active waypoint.
Normal (OBS not activated)
• Automatic sequencing of waypoints
• Manual course change on HSI not possible
• Always navigates ‘TO’ the active waypoint
• Must be in this mode for final approach
course
OBS
• Manual sequencing - ‘holds’ on selected
waypoint
• Manually select course to waypoint from
HSI
• Indicates ‘TO’ or ‘FROM’ waypoint
• Cannot be set for final approach course or
published holding patterns
When OBS mode is active, the G1000 allows the pilot to set a desired course to/from a waypoint using the
CRS/BARO Knob and HSI (much like a VOR).
One application for the OBS Softkey is holding patterns. The OBS Softkey is used to suspend waypoint
sequencing and select the desired course along the waypoint side of the hold. For many approach operations,
setting and resetting of waypoint sequencing is automatic. Holding patterns that are part of an approach
automatically disable waypoint sequencing, then re-enable waypoint sequencing after one time around the