Garmin G1000 Mooney M20TN - Manual (Page 25)

190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN 1-15
SYSTEM OVERVIEW
• INSET Displays Inset Map in PFD lower left corner
OFF Removes Inset Map
DCLTR (3) Selects desired amount of map detail; cycles through declutter levels:
DCLTR (No Declutter): All map features visible
DCLTR-1: Removes land data
DCLTR-2: Removes land and SUA data
DCLTR-3: Removes everything except active flight plan
TRAFFIC Displays/removes traffic information on Inset Map
TOPO Displays/removes topographical data (e.g., coastlines, terrain, rivers, lakes) on Inset Map
TERRAIN Displays/removes terrain information on Inset Map
NEXRAD Displays/removes NEXRAD weather and coverage information on Inset Map (optional)
XM LTNG Displays/removes XM lightning information on Inset Map (optional)
BACK
Press the OFF or BACK Softkey to
return to the top-level softkeys.
DCLTR
DCLTR-2
DCLTR-3
DCLTR-1
TOPO ALERTS NEXRAD
(optional)
TERRAIN XM LTNG
(optional)
OFF TRAFFIC
INSET
INSET XPDR IDENT TMR/REF NRST ALERTS OBS PFD CDI ADF/DME
(optional)
Press the CDI Softkey to cycle through
navigation sources:
- GPS
- NAV1 (VOR/LOC)
- NAV2 (VOR/LOC)
ARC HSI STD BARO BACK ALERTS METRIC DFLTS 360 HSI
PFD
BRG1 BRG2 DME
(optional)
Press the BRG1/BRG2 softkeys to display/
remove the Bearing Information windows
and cycle through bearing sources:
- NAV1/NAV2
- GPS
- ADF
Press the STD BARO or BACK Softkey
to return to the top-level softkeys.
Press the BACK Softkey to return
to the top-level softkeys.
Press the IDENT or BACK Softkey
to return to the top-level softkeys.
XPDR
STBY ON ALT VFR IDENT BACK ALERTS CODE
IDENT BACK ALERTS 0 1 2 3 4 5 6 7 BKSP
Figure 1-14 INSET Softkeys
• PFD Displays second-level softkeys for additional PFD configuration
METRIC Displays Selected and current altitudes additionally in meters and changes barometric
setting to hectopascals (hPa) from inches of mercury (in Hg)
DFLTS Resets PFD to default settings, including changing units to standard
DME Displays/removes DME Information Window (optional)
BRG1 Cycles the Bearing 1 Information Window through:
NAV1: Waypoint frequency/identifier and DME information
GPS: Waypoint identifier and GPS distance information
ADF: Waypoint frequency
Off: Removes window
360 HSI Displays the HSI as a 360° compass rose
ARC HSI Displays the HSI as a 140° viewable arc (Bearing Information Windows unavailable)