Garmin G1000 Mooney M20TN User Manual
Page 267
190-00647-00 Rev. A
Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
6-31
HAZARD AVOIDANCE
At a map range of less than 25 nm, Stormscope lightning data is not displayed, but can still be present. The
presence of Stormscope lightning data is indicated by the annunciation ‘LTNG < 25 nm’ in the upper right
corner (Figure 6-41).
Figure 6-41 Lightning Annunciation
The maximum zoom range can also be set on the Navigation Map. Note that Stormscope data above the
selected maximum zoom range is decluttered.
Selecting a Stormscope range on the Navigation Map:
1)
Press the MENU Key.
2)
Select the ‘Weather’ group.
3)
Press the ENT Key.
4)
Turn the
large FMS
Knob to select ‘STRMSCP SMBL’.
5)
Turn the
small FMS
Knob to select the maximum display range.
6)
Press the
ENT
Key.
7)
Press the
FMS
Knob to return to the Navigation Map Page.
To change the display range on the Navigation Map Page, turn the Joystick clockwise to zoom out or
counter-clockwise to zoom in.