Garmin G1000 Mooney M20TN - Manual (Page 189)

5-71
GPS NAVIGATION
190-00647-00 Rev. A Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN
Reference Waypoints for the selected user waypoint are those specified when the user waypoint was created.
If there is only one valid reference waypoint, the bearing and distance from the reference waypoint is stated
and the second reference waypoint information is dashed. If there are no user waypoints or no valid reference
waypoints, the reference waypoint fields are dashed.
If there are two valid reference waypoints, the bearings from the reference waypoints are stated and the first
reference waypoint’s distance field is dashed.
A map of the currently selected user waypoint and surrounding data is displayed which at a minimum shows
the selected user waypoint and the current aircraft position. A line is drawn between the current position and
the selected user waypoint.
Selecting a nearest user waypoint:
1) With the Nearest User Waypoint Page displayed, press the FMS Knob to activate the cursor. If any previously
entered User Waypoints are within 200 nm, these will be displayed with the closest listed first.
2) Turn the FMS Knob to select the desired waypoint. The remaining information on the Nearest User Waypoint
Page pertains to the selected Nearest User Waypoint.
3) Press the FMS Knob to remove the flashing cursor.