Garmin G1000 Mooney M20TN - Manual (Page 296)

Garmin G1000 Pilot’s Guide for the Mooney M20M/M20R/M20TN 190-00647-00 Rev. A 6-60
HAZARD AVOIDANCE
SWITCHING FROM STANDBY MODE
The unit must be in operating mode for traffic to be displayed. The ability to switch out of standby into
operating mode on the ground is especially useful for scanning the airspace around the airport before
takeoff.
Switching to operating mode from standby mode:
1) On the Traffic Page, press the OPERATE Softkey or press the MENU Key.
2) Turn the small FMS Knob to select ‘Operating Mode’.
3) If ‘Operating Mode’ is selected from the FMS menu, press the ENT Key to confirm and place SKYWATCH in
operating mode.
4) To switch to Standby Mode from the Traffic Page, press the STANDBY Softkey.
ALTITUDE DISPLAY MODE
Changing the altitude display mode:
1) On the Traffic Page, press the ALT MODE Softkey.
2) Press one of the following softkeys:
• BELOW
• NORMAL
• ABOVE
• UNREST
3) Press the BACK Softkey to return to the main Traffic Page.
OR :
1) Press the MENU Key.
2) Turn the small FMS Knob to select one of the following:
• BELOW
• NORMAL
• ABOVE
• UNRESTRICTED
3) Press the ENT Softkey.